
PropertyMatters AI – AI Takeaways
- Potential savings. A schedule that follows when people are home and which rooms they use can cut unnecessary heating.
- What the research measured. Up to 12.9% lower heating demand in simulations for detached houses in Luxembourg.
- Check compatibility first. How the boiler or heat pump is controlled determines which settings make sense.
Occupancy sensors and schedules for individual zones can cut unnecessary heating. From insulation to installation, here’s what determines the saving.
A heating system can run efficiently whenever it switches on and still be on for more hours than the home needs. A smart thermostat can lower the temperature while people are out and schedule it to rise again before they return. These features are useful when they suit the way the property is used and the system it has.
What the study’s 12.9% means
Researchers used eight years of hourly data to simulate alternative settings in detached homes in Luxembourg. In the favourable occupancy-based automation scenario, they calculated a 12.9% fall in heating demand. With 80% adoption and manual overrides during 10% of hours, the simulated saving dropped to 8%. The model’s heating demand reflects a particular climate and building type. A Cyprus household’s heating bill also depends on the tariff, standing charges and equipment. Study in Smart Cities.
What to check before buying
Start by logging when the heating comes on and which rooms need to be comfortable at those times. Then check whether you already have a weekly programmable thermostat or independent controls for each zone. For a heat pump, the settings need to be compatible with the manufacturer’s specifications and the system design so frequent changes don’t undermine efficiency. In an apartment building, check what your own flat can actually control.
The European directive on the energy performance of buildings provides for self-regulating temperature controls by room or zone where technically and economically feasible, with specific provisions for new buildings and equipment replacement in existing ones. Directive (EU) 2024/1275.
A simple payback check
If energy for heating alone costs 900 euros a year, a hypothetical saving of 8% amounts to 72 euros. With installation costing 220 euros in total, the simple payback would be about three years, provided the saving is sustained. Use your own consumption history and compare periods with similar weather. Heat losses through windows and doors and inadequate insulation still need to be addressed separately.
PropertyMatters editorial team















